Bespoke and custom polycarbonate washers
Bespoke polycarb washers are also manufactured by RH Nuttall Limited. If you have a certain application that doesn’t lend itself to a standard size of plastic polycarb washer, then why not try enquiring today for the exact size you require.
Thicknesses of our polycarbonate washers can be from 0.25mm, 0.375mm 0.5mm, 0.8mm, 1mm, 2mm and right up to 3mm, but this normally depends on our stock of base material at any given time, as well as the grade of polycarbonate you require your washers to be made from.
Stamped polycarbonate plastic washers normally start from 0.25mm and can be cut up to and including 3mm in thickness.
Most of the thicknesses over this are then lathe turned to create a quality plastic spacer, bush or washer. Polycarbonate washers in a thinner gauge material act as an excellent solution for shims or separating parts to prevent wear or rubbing.
RH Nuttall is one of a handful of manufacturing companies left within the UK that can produce the size you actually require for your design. Moreover, our prices and lead times are always kept to a minimum, and we offer fantastic savings for bulk orders over any other stockist online.
Free polycarbonate washer samples available
Samples of our polycarbonate washers can be made and sent off to you free of charge to test on your application prior to committing to a bulk order.
Standard Polycarbonate Washers
Certain standard tooling for our polycarbonate washers is also readily available for parts to be cut and despatched within a rapid lead-time. We currently manufacture polycarbonate washers from M3, M4, M5, M6, M7, M8, M10, M12, M15, M16, M20, M25, M30, M32, M40, M50, M63, M75 right up to and including M100.