RH Nuttall are a manufacturer and supplier of quality Mylar A washers. We can manufacture Mylar A washers in virtually any shape and size depending on the application and your requirements. Our Mylar washers are also FDA approved.

Mylar washers from RH Nuttall can also be manufactured with temperatures in mind with temperature prevails of -100 degrees Fahrenheit to +300 degrees Fahrenheit.

Our range of polyester film Mylar washers is extensive with a broad selection of thicknesses readily available.

Applications for Mylar washers

Mylar washers are often used on a vast array of different applications, including electrical and duct insulations.

Mylar is a polyester film type material, and therefore the washers are extremely tough and rugged and the material has some flexibility too.

Mylar is supplied in a transparent colour, our range of Mylar washers has excellent resistance to both moisture and chemicals. Furthermore, as Mylar doesn’t contain any plasticizers it will not become brittle when exposed to hot or cold temperatures.

Small and large runs of Mylar Washers available

RH Nuttall can manufacture both small runs of Mylar washers right through to large multi-thousand runs of Mylar washers. So regardless of how many units you’re looking for, RH Nuttall can help.

Enquire Now

  • This field is for validation purposes and should be left unchanged.

Standard Mylar Washers

Certain standard tooling for our Mylar washers is also readily available for parts to be cut and despatched with industry beating lead times. You could receive your order in as little as 24 hours.

We currently manufacture Mylar washers from M3, M4, M5, M6, M7, M8, M10, M12, M15, M16, M20, M25, M30, M32, M40, M50, M63, M75 right up to and including M100.

Bespoke Mylar washers also available

Alongside our standard Mylar washers, RH Nuttall can accommodate for virtually any internal diameter, outer diameter and thickness required with the extensive range of tooling at our disposal.

Thicknesses of our Mylar washers can be from 0.19mm or 0.38mm, but this normally depends on our stock of base material at any given time as well as the choice of Mylar you require your washers to be made from.

Free Mylar washer samples

Samples of our Mylar washers can be made and sent off to you free of charge to test on your application prior to committing to a bulk order.