Thicknesses of PTFE Strips Available
Thickness of PTFE strip supplied varies depending on the application, but can come as thin as 0.25mm. Our common PTFE strips are supplied in 0.25mm, 0.5mm, 0.75mm, 1mm, 1.5mm, 2mm, 3mm, 5mm, and right up to 10mm in thickness. Automatic guillotine type machinery is then used to cut to any given width required.
Small and large scale runs of PTFE strips
At RH Nuttall Limited we offer PTFE strip from small one off batches to multi thousand metre runs. State of the art slitting and guillotine machinery allows for widths of PTFE strips to start from 10mm wide, and we are capable of producing sections up to and including 1200mm wide.
Our cut PTFE strip is then coiled into suitable lengths, and can even be supplied in cut pieces or pads if desired. PTFE strips or PTFE pads cut to any desired rectangular or square section are readily available.
Grades of PTFE strip
Different grades of PTFE strip can be supplied for individual needs. RH Nuttall Limited currently offer two grades of PTFE strip for immediate dispatch.
Our virgin PTFE grade is free of inclusions and holds full FDA approval. This is a more expensive grade where certain parameters must be adhered to. We also offer a mechanical grade of PTFE strip which is made from a reconstituted grade of PTFE. This grade of PTFE strip offers a more cost effective solution on products such as wear strips.